| 型號 Model | YW-8812SHY/ YW-8815SHY/YW-8825SHY |
| 電源電壓 Power Voltage | AC 220/380/415/440V 3Φ |
| 輸入功率 Input Power | 25KVA/30KVA/50KVA |
| 最大壓力 Max. Pressure | 25T~ 50T |
| 定盤尺寸 Work Plate Size | 400*480MM (or to be your request) |
| 行程 Press Route | 200/230/260MM |
| 機器淨重 Net Weight | 1000-2000KG |
| 高周輸出 HF Output Power | 12KW/15KW/ 25KW |
| 高周頻率 Oscillation Frequency | 27.12MHZ |
| 振盪管 Oscillation Tube | E3130/8T85RB/8T25RA |
特性/ Features：
1. 本機采用 PLC 控制，時間準確，可精確到 0.01 秒，可有效提高生產出來的產品的品質。
This machine uses PLC controller, because of this, the time can be measured accurately up to 0.01 second. Thus, it produces great quality products with the PLC controller.
2.本機采用氣油壓混合加壓方式，具有加壓速度快、壓力調節範圍廣、無噪音等優點。
This machine uses pneumatic/hydraulic pressurized system, thus, it is noiselessness during operating. Moreover, the speed for it to pressurize is fast and the pressure adjusting range is wide.
3.本機具有裁斷功能，高周熔接與裁斷可一次完成，電腦化控制, 數字化呈現, 提高加工 精密程度
This machine is designed with multi-functioning feature. It is able to do high frequency welding and cutting at once. Moreover, YW-8800 adopts computerized interface and digitized control monitor. The entire machine’s setting is digitized, thus it is easier for processing management, and this precise setting provides great output quality.
4.大工作面積, 一次可以配排多量面料, 增加單一次的加工數量, 增加產能。
Extra-large processing space allows operator to place large amount of input materials in one go, which increases productivity of processing line.
This machine uses PLC controller, because of this, the time can be measured accurately up to 0.01 second. Thus, it produces great quality products with the PLC controller.
2.本機采用氣油壓混合加壓方式，具有加壓速度快、壓力調節範圍廣、無噪音等優點。
This machine uses pneumatic/hydraulic pressurized system, thus, it is noiselessness during operating. Moreover, the speed for it to pressurize is fast and the pressure adjusting range is wide.
3.本機具有裁斷功能，高周熔接與裁斷可一次完成，電腦化控制, 數字化呈現, 提高加工 精密程度
This machine is designed with multi-functioning feature. It is able to do high frequency welding and cutting at once. Moreover, YW-8800 adopts computerized interface and digitized control monitor. The entire machine’s setting is digitized, thus it is easier for processing management, and this precise setting provides great output quality.
4.大工作面積, 一次可以配排多量面料, 增加單一次的加工數量, 增加產能。
Extra-large processing space allows operator to place large amount of input materials in one go, which increases productivity of processing line.
YW-8815 contains two processing plates. Thus there is no waste of time to wait for a single plate during operation. Operator can save the time of waiting to place material on the other work place.
6. 自動送料盤設計, 減去人員的操作步驟, 增加產量, 更避免了人員自行操作可能潛在的 危險。
This machine loaded materials automatically, thus operator can avoid potential harm by performing this action. Moreover, the productivity is raised by less procedure acted.
7.本機型裝有火花抑制系統, 安全的保護加工物和模具。
It adopts anti-flash system to protect input materials and the processing mold.
8.本機完整包覆, 減低電池波對操作人員和其他電子設備的干擾。
Radiation is reduced by well covered structure of the machine, both operators and digital device won’t be affected.